1-20 of 48 results
Sort By

- North Suburbs of Chicago, IL

Job Description: Our client is a well-established company that works within the chemical industry. This is an expanding 200+ personnel, PSM regulated site located on the WI/IL border. The plant runs 24/7 and uses primarily mixing, blending and packaging processes. This Plant Manager role will have 6 direct reports and will be responsible for the supervision of production scheduling, reviewing budgets, financial statements and production reports, as well as establishing and implementing....


Job Description: Our client is an expanding chemical company with sites throughout the US and overseas. This person will work at a PSM regulated, multiple site facility that produces batch and continuous specialty chemicals. Responsibilities will focus on pilot plant work, including process scale up, developing preliminary P&ID’s on new products, cost-capital estimates on projects, design through installation of projects, writing SOP’s, conducting PHA/HAZOP studies, debottleneck pilot and....


Job Description: This person will be the manager of a small group of high-performing SAP and MES specialists that support operations and manufacturing excellence across this division which encompasses a total of 25+ facilities. Specifically, this group helps with the standardization of process work flows, works to determine which production and manufacturing metrics are used and how best to use those metrics, and guides this business unit towards increasing levels of efficiency. This....


Minimum Requirements:B.S. in Mechanical, Chemical or Electrical EngineeringRock bottom 5 years of post-college, industry experience, ideally looking for 8-10+ yearsMust have experience managing projects (from conception through start-up) of $5MM-$10MMPotential candidates MUST be out of an industrial or manufacturing setting – that could be a variety of things (chemicals, pulp/paper, building materials, ceramics, semiconductors, steel, etc.) but if someone only has experience out of an EPC....


Company Overview: This company is a privately-owned manufacturer of additives that naturally increase the productivity of livestock (probiotics, minerals, etc). This company is #1 or #2 in 80% of the markets that they are in and the #2 sales person within this company works in this region as well (#1 sales person works the Wisconsin territory). The company was founded in 1980 and today is worth over $2B and operates on a Global level. Job Description: This person will be responsible for a....

- Work from Home, PA

Company Overview: This company is a privately-owned manufacturer of additives that naturally increase the productivity of livestock (probiotics, minerals, etc). This company is #1 or #2 in 80% of the markets that they are in and the #2 sales person within this company works in this region as well (#1 sales person works the Wisconsin territory). The company was founded in 1980 and today is worth over $2B and operates on a Global level. Job Description: This person will be responsible for a....


Minimum Requirements: B.S. Chemical Engineering minimum; 4-25 years of experience - candidates MUST have strong front-end process design skills and should have experience with processes using reactors and/or distillation columns. This company highly prefers candidates be out of operating firms, but will consider people out of E&C firms that have some operating plant experience. Candidate should know how to perform front-end design work and should have experience (ideally) with $1M+....


Minimum Requirements:B.S. in Chemical Engineering HIGHLY preferred – may consider a Mechanical Engineer with a chemicals background12+ years of post-college industry experience, at least 5 years of experience in chemicals manufacturingCandidates should have done design through installation of projects of at least $35MM – this company is looking for people who have some front-end engineering design (FEED) experience as wellSome travel will be required for this role, but not substantialJob....


Salary Range: $80,000 to $105,000/yr. base salary (bonus potential of 20-25%) Job Description: This privately-owned company is a rapidly-growing, global manufacturer of additives. This person will be the plant manager in charge of a 30-person additives manufacturing plant. This person will be responsible for compliance in the areas of safety, product quality and overall production and maintenance within the plant. The plant sometime runs 24/5, sometimes 24/7, depends on the season and demand.....


Experience:B.S. Chemistry, Chemical Engineer or Plastics Engineering degree with 5+ years’ experience within the resin production or extruded polymers industry. Candidate could hold the title of in-plant process engineer or technical service engineer. Pluses would be experience with injection molding, statistical analysis, maintenance of pilot scale equipment and client relation experience.Job Description:Our client is a multi-billion dollar company and leader within the polymer and....

- Racine, WI

Experience: B.S. Chemical Engineering, Chemistry or Business degree with 10+ years of post-college experience with second level supervision out of the chemical or consumer products industry. This person should have experience with the following: training, quality control, safety, continuous improvement, multiple department management, as well as have experience supervising 100+ personnel. Job Description: Our multi-billion dollar client is a world leader in their field, with sites....

- Middletown, NY

Experience: B.S. Chemical or Environmental Engineering or any Science degree with 3+ years of experience out of a chemical facility. Ideally, this person should have experience out of a PSM regulated site and have experience with all aspects of EH&S. Pluses would be knowledge of the following regulations: air, water, solid waste, industrial hygiene, PSM, and operator safety. This role requires up to 50% travel to plants throughout the US, as well as support to the local NY plant. Job....

- Baton Rouge, LA

Experience: B.S. Chemical Engineering degree with 3+ years of experience out of any PSM regulated chemical plant. This person could have previous chemical process engineer experience with exposure to PSM, have lead or been a part of PSM/HAZOP reviews, or have a strong process calculations background with PSM experience. Pluses would be experience with PHA Facilitation, API, NFPA, ASME, or Root Cause Analysis. Job Description: Our client is a rapidly expanding chemical company that working....

- Central, OR

Minimum Requirements:B.S. in Chemical Engineering5+ years of post-college, industry experienceAn ideal candidate would have had previous direct reports, but demonstrable leadership experience would be acceptableCandidates should have previous experience in a PSM-regulated manufacturing environmentJob Description: This person will work at a 75-person batch specialty chemicals manufacturing plant located in Central Oregon near a town of about 100,000 people. This is a quickly growing company


Minimum Experience:B.S. in Chemical Engineering required3-5 years of post-college, industry experience out of chemicals, pharmaceuticals, or something closely relatedCandidates should have worked in a PSM-regulated environment or be familiar with PSM standards in some wayA big plus would be experience with PLC or DCS control systemsMust have excellent communication skills and have a track record of working well in team environmentsJob Description: This person will work at a 70-person....


Minimum Requirements:B.S. in Chemical Engineering HIGHLY preferred – may consider a Mechanical Engineer with a chemicals background10+ years of post-college industry experience, at least 5 years of experience in chemicals manufacturingCandidates should have done design through installation of projects of at least $10MM – this company is looking for people who have some front-end engineering design (FEED) experience as wellSome travel will be required for this role, but not substantialJob....

- Houston, TX

Experience: B.S. Mechanical or Chemical Engineering degree with 8+ years’ experience out of a PSM regulated plant within the specialty chemicals or petrochemicals industry. This candidate muse have experience with the following: root cause analysis, predictive maintenance, design through installation of projects and lubrication requirements. A plus would be experience with both rotating and fixed equipment. Job Description: Our client is located on the east side of Houston in a medium....


Experience: B.S. Mechanical or Chemical Engineering degree with 15+ years’ experience out of a PSM regulated plant within the specialty chemicals or petrochemicals industry. This candidate must have experience with the following: supervising 10+ technicians, root cause analysis, predictive and preventative maintenance, design through installation of projects and lubrication requirements. Job Description: Our client is located on the east side of Houston in a medium sized chemical....


Minimum Requirements: B.S. in Chemical Engineering, Chemistry or Polymer Science with 10 years of experience or five years’ experience with an M.S. or Ph.D. out any process that uses profile-sheet extrusion, extrusion coating, injection molding or reaction injection molding (RIM ). This person must have the ability to demonstrate strong technical credentials and have experience with process optimization, scale-up, developing new products/processes, data analysis, rheology, and customer....


Salary Range: $100,000 to $125,000/yr. base salary (bonus eligible role) Requirements: B.S. Chemical Engineering required; 4-25 years of experience - candidates MUST have strong front-end process design skills and should have experience with processes using reactors and/or distillation columns. This company highly prefers candidates be out of operating firms, but will consider people out of E&C firms that have some operating plant experience. Candidate should know how to perform front-end....

1-20 of 48 results